Julkort med bokstavspärlor –
Christmas cards with letter beads

Christmas cards with letter beads - by Craft & Creativity

Hemmagjorda julkort behöver inte vara så avancerade. Mina julkort gjorde jag på ett kick och i år kör jag på en minimalistisk stil med naturfärgat papper, bokstavspärlor och vita, röda och svarta detaljer.
————
Homemade Christmas cards need not be advanced at all. I made mine in a snap, and this year I’m going for a minimalistic look with natural looking kraft paper, letter beads and white, red and black accents. God Jul is Swedish for Merry Christmas.

Christmas cards with letter beads - by Craft & Creativity

Du behöver: Kort och kuvert, bokstavspärlor, pärlor med hjärtan, lite tråd och en nål för att göra hål i kortet. Jag använde naturfärgade kort i kvistkvalitet (10,5×15 cm) och 0,8 mm tunn elastisk smyckestråd. Det går lika bra med icke-elastisk nylontråd/fiskelina eller sytråd. Det gäller bara att tråden är tunnare än 1 mm för att passa bokstavspärlornas hål.
————-
You will need: Cards and envelopes, letter beads, heart beads, some thread and a needle to make holes in the card. I used kraft paper cards and 0.8 mm thin elastic cord. You can use non-elastic nylon cord or sewing thread as well. The only important thing is that the tread is thinner than 1 mm to fit the holes of the letter beads.

Christmas cards with letter beads - by Craft & Creativity

Gör så här: Bestäm var du vill att texten ska sitta. Mät ut två hål med 5 cm mellan (precis lagom för 6 st bokstavspärlor + 1 st hjärta). Gör hål med nålen. Trä pärlorna på tråden och stick ner ändarna i hålen. Knyt ihop tråden på insidan av kortet. Dekorera korten som du själv tycker blir fint. Jag klippte ut trekanter av restpapper som skulle efterlikna granar (skulle kunna vara tomtemössor också…) och limmade fast dem med limstift. Slutligen ritade jag dit granarnas fötter med en svart Uni Posca marker.
———–
Do like this: Determine where you want the text to sit. Measure out two holes as far apart as the length of the letter bead text. One bead is 7 mm wide. Make holes with a needle. Thread the beads onto the cord and stick the ends into the holes. Tie the ends together on the inside of the card. Decorate the card any way you want. I cut out triangles of scrap paper that are supposed to look like Christmas trees (could be Santa hats as well…), and glued them in place with a glue stick. I finished my cards by drawing feet on the Christmas trees with a black marker.

Christmas cards with letter beads - by Craft & Creativity

5 thoughts on “Julkort med bokstavspärlor –
Christmas cards with letter beads

Leave a Reply to Helena, Craft and Creativity Cancel reply

Your email address will not be published.